TP-Link brand is the one that is known to almost everyone. As all the WiFis are not able to cover the complete area of the home. Therefore, instead of buying the new internet connection, you can save your bucks by buying the TP-Link repeater. To set up the repeater, you need to login into the tplinkrepeater.net. But, what to do when the tplinkrepeater.net is not working? Well, in this blog, you will get the steps to resolve this issue and make the login page work again. Once, login page starts working, and you have completed the setup, then you can easily boost your network range. So, check out the steps mentioned in the coming sections and resolve your issue for TP-Link repeater.
Steps To Make tplinkrepeater.net Working
The first thing that you need to know is when to say tplinkrepeater.net is not working. When your page for tplinkrepeater.net is not loading or not opening, then it is considered as the working trouble. Because, if this page will not open or get loaded, then you won’t be able to complete the login and setup. Therefore, it is important to rectify this issue. In order to resolve this, there is a need to follow the steps mentioned below:
Step 1: First, make sure your TP-Link repeater is connected to the system either via wired or wireless method.
Step 2: Sometimes, stored cache may also lead to this issue. Therefore, delete all the cache memory of the browser.
Step 3: Make sure you are entering or typing the right access link i.e. tplinkrepeater.net.
Step 4: Ensure that you are not placing repeaters too far away from the system or the main router.
Step 5: Make sure you are using the browser that is updated with the latest updates.
Step 6: Also, make sure the firmware is updated for the TP-Link repeater that you are using.
Step 7: If none of the steps have worked out for you, then reset your TP-Link repeater to refresh it. For this,
- Find the reset button located at the back of the TP-Link repeater.
- Then, press it for 7-10 seconds till all the LEDs don’t get off.
- After that, release it and wait for the TP-Link repeater to get rebooted again properly.
- Again, in your system, try to access the tplinkrepeater.net and complete the setup.
Step 8: If none of the above steps have worked out for you, then replace the hardware as it has the fault.
Therefore, these are the steps after which you will be able to access the tplinkrepeater.net in your browser. Therefore, once accessed, then you need to complete the setup with the steps mentioned in the coming section.
Complete The Setup With tplinkrepeater.net
In order to complete the setup for the TP-Link repeater, you need to follow the instructions mentioned below:
Step 1: First, connect the TP-Link repeater to the system in which you want to complete the setup.
Step 2: Then, open the web browser of your choice but it should be updated.
Step 3: Now, access the web page for the TP-Link repeater with the tplinkrepeater.net.
Step 4: This will open the login screen for your TP-Link repeater.
Step 5: Enter the default login credentials for username and password on the login screen.
Step 6: Then, click on the Login or SignIn button on the screen.
Step 7: You will reach the dashboard for the setup or configuration of the TP-Link repeater.
Step 8: Now, from the list of the available WiFi networks for extension, select the name of your main network.
Step 9: Next, enter the password for your network, and connect to it.
Step 10: If it got connected successfully, then it means your network got boosted.
Step 11: Now, disconnect the repeater from the current location, and connect it somewhere near to the dead-zone.
Step 12: Power it on, and try to connect your wireless device with the repeater’s network.
If it got connected successfully, then you have successfully completed the setup of the TP-Link repeater. Therefore, in this way, your main network will get boosted and covers your complete home.
Tplinkrepeater.net Has No More Trouble!
Summing up! There is no need to worry if the tplinkrepeater.net is not working. You just need to follow the very simple steps of troubleshooting. Once troubleshooting is done, you will get your tplinkrepeater.net working, and you can easily complete the setup. In case, after following these troubleshooting steps, still the access link is not working. Then, you just need to contact our experts, and they will guide you to the solution as per your cause. Therefore, by the end, you will have the tplinkrepeater.net working for you. So, no need to worry about the network range from now onwards. You just need to boost your network with the TP-Link repeater, and cover every corner of your home.
No comments:
Post a Comment