Repeater solves the purpose of boosting the signal of your existing WiFi network. So, it is good to have the repeater instead of buying a new router and connection again. For this purpose, the TP-Link repeaters are always recognized as the best. But, to make use of the repeater, there is a need to complete the http //tplinkrepeater.net login. Moreover, to complete the setup of your TP-Link repeater, there is a need to do http //tplinkrepeater.net login. Anyhow, do you know there are different methods for you to complete the setup of TP-Link repeater? If not, then this blog is solely for you. In this blog, all the different methods are explained to complete the setup for the TP-Link repeater. So, let’s get started!
Setup Your TP-Link Repeater With http //tplinkrepeater.net Login
This section is going to help you with the setup procedure for the TP-Link repeater. The three different methods are explained which would help you to complete the setup of your TP-Link repeater. So, you are going to explore all the methods in this section one by one. Therefore, follow the method which you find the easiest one.
- Using The Web Browser
This method is the basic method. It means, if you are not able to complete the TP-Link setup using the other methods, this method will work. Therefore, carefully have a look at the below steps to learn about this method:
Step 1: First, connect your TP-Link repeater to the power socket, and turn it on with the power button.
Step 2: Then, disconnect your system from the existing WiFi network.
Step 3: Next, connect your system with the TP-Link repeater’s network using ethernet or wireless method.
Step 4: After that, open the web browser- the main element in this method.
Step 5: Enter the URL as http //tplinkrepeater.net login in the address field.
Step 6: This will redirect you to the login screen for the TP-Link repeater.
Step 7: Complete the login using the default details. It may also ask you to set the new login details for the admin control. Complete it if prompted.
Step 8: On the successful login, you will be at the admin panel for the TP-link repeater.
Step 9: The setup screen will open the list for the available WiFi networks.
Step 10: Select the name of your existing home network which you want to boost or extend.
Step 11: Enter the security key for the selected network, and connect to it.
Step 12: So, this will complete the setup for the TP-link repeater. Don’t forget to save all the settings.
Step 13: Now, place your TP-Link repeater at the middle point for the full signal and the dead network zone.
So, you can now connect your wireless device to the Tp-Link repeater’s network.
- Using The WPS
This method is the easiest one, but for this, your router should support the WPS feature. So, if your router has the WPS button, then, go with the following steps:
Step 1: First, place your TP-Link repeater at the location which is very near to the router.
Step 2: Then, turn on the repeater, and press the WPS button on it.
Step 3: This will make the WiFi LED to blink on the TP-Link repeater device.
Step 4: Immediately, press the WPS button the router as well present in the same room.
Step 5: Wait till both the LEDs don’t stop blinking.
Step 6: When the LEDs get stable on the repeater and the router, then both of your devices are connected.
Step 7: In case, both LEDs are not lighting in stable form, then repeat the whole procedure again.
Step 8: Now, place your TP-Link repeater at the middle point for the full signal and the dead network zone.
Step 9: Connect your wireless device with the repeater’s network using the existing router’s credentials.
- Using The TP-Link Tether App
Like other manufacturer’s have the app for the setup, similarly, there is a Tether app for TP-Link. So, you can also complete the setup using the following steps:
Step 1: First, download the TP-Link Tether app on your device from the Google Play store or App Store.
Step 2: First, connect your TP-Link repeater to the power socket, and turn it on with the power button.
Step 3: Then, disconnect your system from the existing WiFi network.
Step 4: Now, open the TP-Link Tether app.
Step 5: It may or may not ask you for the login.
Step 6: If asked, then use the default username and password mentioned on the repeater.
Step 7: Further, the app will scan for the available existing WiFi networks in its range.
Step 8: Select the name of the existing network, and enter the password to connect to it.
Step 9: Save all the settings that you have made in the app.
Step 10: Now, place your TP-Link repeater at the middle point for the full signal and the dead network zone.
Step 11: Connect your wireless device with the repeater’s network using the existing router’s credentials.
So, these are the three different methods to complete the TP-Link repeater setup. As mentioned above, if the two methods are not useful for you, then use the web browser method
http //tplinkrepeater.net Login Is For Everyone!
From this blog, it is c;ear to you that web browsers can be used by anyone for TP-Link repeater setup. Therefore, you just have to complete the http //tplinkrepeater.net Login and you are on the setup screen for the TP-Link repeater. In case you are getting stuck for http //tplinkrepeater.net login, then you can call us on a toll-free number without any hesitation. Our expert team will help you to complete the TP-Link repeater setup with a step by step guide. So, get ready to boost your existing WiFi signal with the TP-Link repeater. Therefore, you can use the internet at any point in your home wherever you want.
No comments:
Post a Comment