Setup Your TP-Link Repeater With Tplinkrepeater.net

TP-Link is a brand known to almost everyone for networking devices. So, for the extension of the range of your signal, there are TP-Link repeaters. The TP-Link repeater is not a plug-and-play device. There is a need to complete the setup of the TP-Link repeater with tplinkrepeater.net. In this blog, you will find the steps to complete the TP-Link repeater setup with different methods. Also, you will get to know how to update the firmware for the TP-Link repeater with tplinkrepeater.net. So, by the end of this blog, you will have almost all the information for the TP-Link repeaters. Therefore, now is the time to start with the procedures for the TP-Link repeater setup.

Complete The TP-Link Repeater Setup With tplinkrepeater.net

There are different methods with which you can complete the TP-Link repeater setup. These methods are:

1. Wireless Connectivity Method
2. Wired Connectivity Method
3. WPS Method

For the first two methods, there is a need to login into tplinkrepeater.net. But, for the WPS, there is no need, and you can complete the setup quickly. So, let’s discuss all the methods one by one to complete the TP-Link repeater setup.

1. Wireless Connectivity Method

In the wireless connectivity method, you need to follow the steps mentioned below:

Step 1: First, connect your TP-Link repeater to the power source, and in the range of the existing WiFi router.

Step 2: Then, in your system, click on the WiFi or Network icon present on the taskbar.

Step 3: Disconnect from the network with which your system is connected.

Step 4: Then, look for the Tp-Link Repeater network and connect to it.

Step 5: After that, open the web browser in your system.

Step 6: Enter the access link as tplinkrepeater.net in the URL field.

Step 7: This will open the admin login page for the TP-Link repeater.

Step 8: Enter the username and password as mentioned over the TP-Link repeater.

Step 9: Now, click on the Login button.

Step 10: You will be redirected to the admin panel, and the setup screen will open on the first-time login.

Step 11: Select the name of your existing WiFi network from the list.

Step 12: Then, enter the password for your existing WiFi network.

On the successful connection, the wireless setup is complete for the TP-Link repeater. After that, you need to unplug your repeater from the current location. Connect it wherever it is required but should be in the range of the router.

2. Wired Connectivity Method

If you want to get rid of the internet fluctuations and want to have a secure TP-Link repeater setup. Then, you should go for the wired connectivity method. Following are the steps to complete the wired setup for the TP-Link repeater:

Step 1: First, connect your TP-Link repeater to the power source, and should be close to the system and existing router. 

Step 2: Now, connect one end of the ethernet cable to the system and the other to the TP-Link repeater.

Step 3: Then, in your system, click on the WiFi or Network icon present on the taskbar.

Step 4: Disconnect from the network with which your system is connected.

Step 5: If it got connected automatically with the TP-Link repeater’s network then leave it as it is.

Step 6: Otherwise, look for the TP-Link Repeater network and connect to it.

Step 7: After that, open the web browser in your system.

Step 8: Enter the access link as tplinkrepeater.net in the URL field.

Step 9: This will open the admin login page for the TP-Link repeater.

Step 10: Enter the username and password as mentioned over the TP-Link repeater.

Step 11: Now, click on the Login button.

Step 12: You will be redirected to the admin panel, and the setup screen will open on the first-time login.

Step 13: Select the name of your existing WiFi network from the list.

Step 14: Then, enter the password for your existing WiFi network.

So, this completes the wired connectivity method for the TP-Link repeater setup. As you can see both the methods for the setup need the access link as tplinkrepeater.net. Now, the next method is the WPS method which doesn’t need this link.

3. WPS Method

This method is useful if both your repeater and the router have the WPS button. For the WPS method, follow the instructions as mentioned below:

Step 1: First, connect your TP-Link repeater to the existing router.

Step 2: Then, keep the WPS button pressed on the TP-Link repeater.

Step 3: Within 2 minutes, also press the WPS button on your router for which you want to extend the signal.

Step 4: Keep the WPS button pressed for both the devices till the LEDs don’t get stable on connectivity.

Step 5: Then, release the button.

Step 6: Now, you can connect any wireless device with the extender’s network using the same credentials as the existing WiFi network.

So, these are the different methods to complete the TP-Link repeater set up with the tplinkrepeater.net. In case, there is any setup issue, then also you can look for troubleshooting help with tplinkrepeater.net. Though, the issue can also be because of the firmware issue. So, the steps for troubleshooting the firmware update are mentioned below.

How To Update Firmware For TP-Link Repeater?

The steps to update the firmware for the TP-Link repeater are:

Step 1: Complete the login process for the TP-Link repeater using tplinkrepeater.net.

Step 2: Then, you will reach the admin panel.

Step 3: Now, navigate to the tab of the Advanced Settings.

Step 4: Select the option of the Firmware Update from there.

Step 5: Click on the Save button to apply the settings you have made.

So, this will update the firmware for your TP-Link repeater and get rid of any issues that are there with the TP-Link repeater. 

Everything About TP-Link Setup!

Wrapping up! This blog is the complete guide for the TP-Link setup with tplinkrepeater.net. Moreover, you can also update the firmware for your TP-Link repeater with tplinkrepeater.net. So, it doesn’t matter how you want to complete the setup of your repeater, all the methods are defined here. Contact us if you face any issues with the TP-Link Setup. Our team with expertise in this will resolve your issues. So, here you will get everything about the TP-link setup. So, get help from this blog, and extend your home network.