What To Do When http //tplinkrepeater.net login Is Not Working?

If you own WiFi, then you must know you are not able to access the network in every corner of your home. Every router has its specific range for the network. You can use TP Link extenders for the extension of your network range. But, to use it, first you need to use the http //tplinkrepeater.net login link to log in for the setup of the TP Link extender. Sometimes, due to different reasons, you may face the error http //tplinkrepeater.net login is not working. So, what to do at this time. Well, this article will help you to troubleshoot this issue. Therefore, follow the steps accordingly, and by the end, you are able to login into your TP Link extender. 

Troubleshooting http //tplinkrepeater.net login

You may face different issues during the login with http //tplinkrepeater.net. So, based on different issues, you need to follow the different steps for troubleshooting. 

1. Not Able to Access http //tplinkrepeater.net

When you are not able to access the http //tplinkrepeater.net link after typing it right in the address bar, then you need to follow the steps as mentioned below:

• Make sure you have connected your system properly with the TP Link extender’s network.
• Check the network settings of your system as the dynamic settings should not be on for the IP address.
• Try to use the default IP address which can either be 192.168.1.1 or 192.168.0.254 (based on your extender model).
• If the above steps don’t work, then there is a need to reset the TP Link extender.

2. If Your TP-Link Extender Is Working Improperly

Sometimes, you may see that you are able to connect with the extender’s network but you may get disconnected in between. It means there is a placement issue for the TP-Link router. 

• Make sure you have placed the extender halfway between the router, and the extender.
• Check the indication light over the extender, it should be solid green showing the optimized place for your extender.
• The extender should be in the proper range for the wireless router.

If you have followed these steps and still not able to connect with the TP-Link router, you should reset the router again. 

Resetting the TP-Link Router

Step 1: First, find the reset button at the back of the router.

Step 2: Press the reset button with the pin-point object.

Step 3: Keep the reset button pressed for around 10 seconds.

Step 4: Then release the reset button. 

This will bring all the settings to default and you will have to login into the extender again.

TP-Link Extender Will Work Now!

These steps will help you to troubleshoot the http //tplinkrepeater.net login and you will be able to log in again. This will make your TP-link extender work again, and you can extend your network properly. If these steps don’t work out for you, then contact our team. They have expertise in the issue of extenders. They will help you in the resolution of your problem and that too with easy steps. So, get your problem resolved and extend your network.