Different Ways To Setup The TP-Link Repeater With http //tplinkrepeater.net Login

TP-Link repeaters are the best-budget repeaters present in the market. They are simple to use because of their simple design. To use the repeater for the extension of the network, there is a need to complete the setup. For the setup, you just need to visit http //tplinkrepeater.net login and login into the TP-Link network. There are different ways available for the TP-Link Repeater setup. So, this guide will let you know about the different ways the setup of the TP-Link Repeater. The basic one is with the help of http //tplinkrepeater.net login. So, get to know about the setup method one by one.

Using a Web Browser With http //tplinkrepeater.net Login

The basic method that everyone can use for the login of the TP-Link repeater is with the help of the web browser. Whether you are using the system or the smartphone, you can use the web browser for the login of the TP-Link repeater. The steps for the login are as follows:

Step 1: Turn on the switch of your TP-Link repeater.

Step 2: Connect your system with the repeater’s network using an ethernet cable or wireless network.

Step 3: Launch the updated web browser in your system.

Step 4: Enter the address as http //tplinkrepeater.net login in the address field of the browser.

Step 5: The login screen for the TP-Link repeater will appear.

Step 6: Enter the default credentials for your repeater in the required fields.

Step 7: The setup screen will show the list of the available networks.

Step 8: Then, select the name of the existing network to which you want to extend.

Step 9: If your WiFi is password protected, then enter the password for your existing repeater.

Step 10: Click on the Save button to apply the settings.

Step 11: Then, connect the TP-Link repeater at the desired place.

Step 12: After that, you can connect your device to the TP-Link repeater in the dead zone area.

Using the WPS Button

If your router supports the WPS button, then you can complete the setup for your TP-Link router. You need to follow the steps as below:

Step 1: Keep and turn on the TP-Link repeater in the range of the WiFi router.

Step 2: Then, press the WPS button on the TP-Link repeater.

Step 3: The WiFi LED will start blinking on the TP-Link repeater.

Step 4: Within two minutes, press the WPS button on the router as well which you want to extend.

Step 5: When both the devices will connect, the LED light will get solid.

Step 6: Then, connect to your repeater’s network with the same password as your router. 

Using the TP-Link Tether App

There is also a Tether App to complete the setup of the TP-Link repeater, as it will make the process easier. The steps for setup with the TP-Link Tether App as follows:

Step 1: First, download and install the TP-Link Tether app from the Play Store.

Step 2: Place the TP-Link repeater in the range of the existing router.

Step 3: Now, turn on the repeater, and wait for some time to get it started.

Step 4: Then, connect your phone with the WiFi network.

Step 5: Open the Tether app.

Step 6: The app will scan for the available WiFi networks.

Step 7: Connect to the network, and then enter the password for the WiFi network.

Step 8: Once it is connected, you can connect to the extender’s network.

TP-Link Repeater Setup is Complete!

These are all the possible methods to complete the setup for the TP-Link repeater. So, if you want to keep it simple, and basic one, then use the http//tplinkrepeater.net login. In case, you face any kind of problem with the setup, contact our team with expertise in TP-Link repeaters. They will assist you in the TP-Link repeater setup, and you will connect to the extender’s network by the end!