Detailed Instructions For TP-Link Repeater With http //tplinkrepeater.net Login

People usually get confused with the login process of the TP-Link repeaters. Well, it is not difficult, though the login link is different from that of the router. For the Tp-Link login, one should go with the http //tplinkrepeater.net login and complete the login for their repeater. If you don’t know about the steps, let’s follow this blog. This will provide you with all the steps for the login to the firmware update with http //tplinkrepeater.net login. Great, isn’t it!

Steps For Login With http //tplinkrepeater.net Login

If you have bought the TP-Link repeater for the extension of the network, then it is a good choice. But, to make it work, you have to first complete the setup of the Tp-Link repeater. So, follow the steps mentioned below:

Step 1: First, connect the TP-Link repeater to a power plug near to the WiFi, if possible in the same room.

Step 2: Then, connect the system with the TP-Link repeater network using an ethernet or wireless network.

Step 3: Then, open the web browser in your system.

Step 4: In the URL field, enter the login link i.e. http //tplinkrepeater.net login.

Step 5: The login screen for the TP-Link repeater will appear on the screen.

Step 6: Enter the default username and password for your repeater. (Default credentials can be found over the sticker on the repeater)

Step 7: Click on the Login button.

Step 8: On the successful login, you will have admin access for the extension of the network.

Step 9: Now, the list of the network available for connection will pop up on the screen.

Step 10: Select the name of your home network you want to extend.

Step 11: Enter the password for your home wireless network if it is password protected.

Step 12: You can also change the name of your extended network and set the password for access to the extended network.

Step 13: Click on the Save button to apply all the settings.

Step 14: Now, place your repeater at the desired place where the network gets weak.

Step 15: Then, you can connect your desired devices with the repeater’s network.

If you are connected to the repeater’s network successfully then you have completed the setup in a proper way. In case, your repeater was working fine for some time, but it has stopped working. Then, the old firmware could be the one reason. There is a need to update the firmware for the TP-Link repeater. 

Firmware Update With http //tplinkrepeater.net Login

To perform the firmware update, follow the instructions given below:

Step 1: Complete the TP-Link Repeater Login with http //tplinkrepeater.net login as mentioned above.

Step 2: Then, on the admin panel, select the Advanced tab from the ribbon.

Step 3: Locate the option of the Firmware Upgrade and select that.

Step 4: Select the option of Manual to perform the update manually.

Step 5: Then, in the browser, search for the latest firmware file for the TP-Link Repeater and download it.

Step 6: Then, run the downloaded file for installation and complete the upgrade process for the TP-Link repeater’s firmware.

TP-Link Repeater Is Working!

These are all the steps to make your TP-Link repeater work with http //tplinkrepeater.net login. As you can see, the steps are very easy, and you can complete them on your own. In case, there is some other issue not mentioned in this blog, then you can reach us on our toll-free number. You can explain your problem or issue to our expert team members and get the best solution in no time. So, extend your network with TP-Link repeater without any worries with us!